AW11 4agze Custom Vacuum Line Kit

This is our custom vacuum line kit for the supercharged 4agze in the AW11 MR2.

This kit will replace every vacuum line on the engine, including those on the supercharger, thus eliminating the possibility of a vacuum leak due to a cracked/dry rotted line. If you have ever had to trace down a vacuum leak this is the kit for you.

This is only the bulk silicon to replace the stock rubber lines on your 4agze. This is not a pre-cut kit. We have yet to have had a 4agze in the shop long enough to create the same as our 20v kits. What you are getting is enough uncut silicon line to replace your vacuum lines. You will need to cut the lines to fit your exact application.

Our kit is made from professional quality high grade silicon and is available in your choice of RED, BLUE, YELLOW, or BLACK. You can add the lines that go to/from the A/C idle up solenoid and/or cruise vacuum module.


*NOTE* These lines are press fit silicon, very much like the stock rubber lines. We include clamps for the lines on the supercharger itself to ensure they seal properly. Be sure to use the clamps to ensure a good seal